Flow Injection Analysis of Organic Peroxide Explosives using Acid Degradation and Chemiluminescent Detection of Hydrogen Peroxideстатья

Статья опубликована в высокорейтинговом журнале

Информация о цитировании статьи получена из Scopus, Web of Science
Статья опубликована в журнале из списка Web of Science и/или Scopus
Дата последнего поиска статьи во внешних источниках: 29 ноября 2015 г.

Работа с статьей


[1] Flow injection analysis of organic peroxide explosives using acid degradation and chemiluminescent detection of hydrogen peroxide / P. Mahbub, P. Zakaria, R. M. Guijt et al. // Talanta. — 2015. — Vol. 143. — P. 191–197. The applicability of acid degradation of organic peroxides into hydrogen peroxide in a pneumatically driven flow injection system with chemiluminescence reaction with luminol and Cu2+ as a catalyst (FIA-CL) was investigated for the fast and sensitive detection of organic peroxide explosives (OPEs). The target OPEs included hexamethylene triperoxide diamine (HMTD), triacetone triperoxide (TATP) and methylethyl ketone peroxide (MEKP). Under optimised conditions maximum degradations of 70% and 54% for TATP and HMTD, respectively were achieved at 162 μL·min-1, and 9% degradation for MEKP at 180 μL·min-1. Flow rates were precisely controlled in this single source pneumatic pressure driven multi-channel FIA system by model experiments on mixing of easily detectable component solutions. The linear range for detection of TATP, HMTD and H2O2 was 1-200 μM (r2= 0.98∼0.99) at both flow rates, while that for MEKP was 20-200 μM (r2=0.97) at 180 μL·min-1. The detection limits (LODs) obtained were 0.5 μM for TATP, HMTD and H2O2 and 10 μM for MEKP. The detection times varied from 1.5 to 3 min in this FIA-CL system. Whilst the LOD for H2O2 was comparable with those reported by other investigators, the LODs and analysis times for TATP and HMTD were superior, and significantly, this is the first time the detection of MEKP has been reported by FIA-CL. [ DOI ]

Публикация в формате сохранить в файл сохранить в файл сохранить в файл сохранить в файл сохранить в файл сохранить в файл скрыть